ChromaFuse Direct To Film Roll - 11.8" x 328 Ft


Was: $109.00
Now: $87.20

Sale! Save 20%!

FREE sample roll available. See description below.
Adding to cart… The item has been added

ChromaFuse film is a high quality DTF product offered exclusively by Specialty Graphics Supply.  ChromaFuse can be used with most direct to film printers and produces exceptional results at a great value.  Once the printed design is heat pressed onto the garment, the film will release as a warm or cold peel for an easy and efficient work flow.

Try a FREE sample of ChromaFuse DTF Film before committing to a full roll. Limit one per customer.

Match ChromaFuse DTF film with the ChromaFuse DTF Powder for the best results.


  • Roll size: 11.8" wide x 328 feet (100m) in length with an acceptable width variance of +/- .25".
  • Single-sided, matte coated
  • For direct to film (DTF) printers only.

Cotton, polyester and cotton/poly blends
50/50 Synthetic Blend or 100% Poly - 280°F 100% Cotton - 320°F
Note: If you have adhesion issues it is recommended to start trouble shooting by reducing the temperature and time.
6 - 10 seconds
Light to Medium, even pressure (20 to 30# PSI)
Note: It is ideal to use a pressing pillow.
Remove from press, rub transfer into garment then peel warm or cold. Note: Peel design perpendicular to garment, DO NOT pull film up and away.
Important Notes:
Adjust time, temp and pressure as needed based on the textile/substrate.
Use higher temperature range for cotton and the lower temperature range for polyester and synthetic textiles.
A post press of approx. 10-15 seconds with parchment paper or another cotton or canvas textile to apply textured finish and improve adhesion, durability, and washability. To produce a glossy finish, use a PTFE non-stick sheet for the post press instead of the parchment paper.
Machine wash warm with mild detergent. Dry at normal setting. No chlorine bleach.

Note: Because of the wide variety of fabrics and garment manufacturers that exist, we highly recommend that this product be fully tested prior to going into production.