ChromaFuse film is a high quality DTF product offered exclusively by Specialty Graphics Supply. ChromaFuse can be used with most direct to film printers and produces exceptional results at a great value. Once the printed design is heat pressed onto the garment, the film will release as a hot, warm, or cold peel for an easy and efficient work flow.
Specifications:
- Roll size: 12.9" wide x 328 feet (100m) length
- Single-sided, matte coated
- For direct to film (DTF) printers only.
Materials
Cotton, polyester and cotton/poly blends
Temperature
265°F - 325°F
Time
6 - 10 seconds
Pressure
Medium to high, even pressure (20 to 30# PSI)
Peel
Peel hot, warm, or cold
Important Notes:
Adjust time, temp and pressure as needed based on the textile/substrate.
Use higher temperature range for cotton and the lower temperature range for polyester and synthetic textiles.
A post press of approx. 10-15 seconds with parchment paper is highly recommended for improved adhesion, durability, and washability. To produce a glossy finish, use a PTFE non-stick sheet for the post press instead of the parchment paper.
Use higher temperature range for cotton and the lower temperature range for polyester and synthetic textiles.
A post press of approx. 10-15 seconds with parchment paper is highly recommended for improved adhesion, durability, and washability. To produce a glossy finish, use a PTFE non-stick sheet for the post press instead of the parchment paper.
Care
Machine wash warm with mild detergent. Dry at normal setting. No chlorine bleach.
Note: Because of the wide variety of fabrics and garment manufacturers that exist, we highly recommend that this product be fully tested prior to going into production.
