Graphtec OEM replacement cutter protection strip for the CE6000-40 and CE6000-60 vinyl cutters. The cutter protection strip runs the width of the cutter underneath the blade track. Its purpose is to protect the blade and machine from damage should the cutting depth be set too deep.
The cutter protection strip should be replaced when it has a deep groove cut into it from the blade. If it isn't replaced, the blade will no longer cut at an even depth across the width of the vinyl/media resulting in poor cut quality.
Each box contains 2 cutter protection strips and application instructions.
Note: These protection strips will not fit the CE5000 series cutters or other legacy Graphtec models.