Siser ColorPrint Mask - 54" x 50 yds.

1.  Cut a piece of the mask slightly wider than the images to cover.
2.  Remove the paper backing of the mask and set aside.
3.  Grasp the mask on either end with the adhesive side down.
4.  Place the mask over the image letting the middle drop down centering it over the images to cover.
5.  Use the flat end of a squeegee, press down on the mask using firm pressure.  Start from the center and work your way outward toward the edges.
6.  Repeat this process in several directions. This will remove any trapped air and create a bond between the mask and the image(s).
7.  Trim away any excess mask.
8.  Lift a corner of the mask and remove the mask from the paper backing by pulling it back at a 45° angle using a slow and steady motion.
9.  Place the mask back on the shiny side of the original masking paper.
10. Cut the images to the proper size for heat application.