SGS Light 11" x 17" Transfer Paper

Application Instructions:

1.  Pre-heat the heat press to 345-degrees F.
2.  Mirror the image (reverse) and print onto the white side of the paper using an inkjet printer.
3.  Trim away the unprinted areas of the transfer if desired using scissors, a knife or vinyl cutter if desired.
4.  Prepress the garment to remove wrinkles and moisture.  Allow the garment to cool.
5.  Position the transfer paper, with the printed image facing down, onto the garment in the desired position.
6.  Cover the transfer paper with a Teflon coated fabric sheet.
7.  Press for 20 seconds using medium pressure.
8.  Allow the garment to cool completely.
9.  Carefully and evenly peel away the backing paper.  To facilitate peeling, gently fold the fabric near an edge of the transferred image.

Hand ironing instructions will be included with the product.

 Other Information:

• Use in a well-ventilated area.
• Not recommended for HP DeskJet 1200C or 1600C models because they apply heat.
• Keep the transfer paper in the provided zip-lock sleeve between uses.  Store in a cool and dry place.