SGS Dark 11" x 17" Transfer Paper

Application Instructions:

1.  Pre-heat the heat press to 345-degrees F.
2.  Print design onto the white side of the paper using an inkjet printer.  Do not mirror (reverse) the image.
3.  Trim away the unprinted areas of the transfer using scissors, a knife or a contour cutting vinyl cutter if desired.
4.  Prepress the garment for a few seconds to remove wrinkles and moisture.  Allow the garment to cool.
5.  Carefully peel the printed design from the backing paper and place the design onto the cool fabric in the desired position.  Be careful to keep the design away from the heat to prevent curling.
6.  Cover the design with an overlay sheet (included).
7.  Cover the overlay sheet with a Teflon coated fabric sheet if desired.
8.  Press for 20 seconds using Medium pressure.
9.  Allow the garment to cool completely.
10.  Carefully peel the parchment paper off the printed design.  Save the parchment paper for reuse.

Hand ironing instructions will be included with the product.

 Other Information:

• Use in a well-ventilated area.
• Not recommended for HP DeskJet 1200C or 1600C models because they apply heat.
• Keep the transfer paper in the provided zip-lock sleeve between uses.  Store in a cool and dry place.