Ink Jet Laptop Skin Blanks

Product features & Benefits:

• Inkjet printable using most major injet printers.
  
• True digital, photo quality coating provides stunning results.
  
• Premium, durable, automotive grade vinyl is designed to last. Easy to trim if desired.
  
• Provides a protective layer against scuffs, scrapes, and surface scratches from everyday use.
  
• Provides a resurfacing solution for already scratched laptops.
  
• Moisture resistant; ink won't transfer to your hands.
  
• Easy to apply and to remove.  No hard to clean adhesive residue.
  
• Die cut to enable full edge to edge printing of your design.
  
• Rounded corners resist inadvertent lift.
  
• Allows for a truly unique custom design.

Instructions:

1. Create your design using your computer.  High resolution images will give the best quality print.  Set the margins to 0.5", this will allow you to print fully to the cut edges.
2. Print a test page on standard paper to ensure that the positioning and quality is acceptable.
3. Print your design onto the laptop skin.  It is recommended to feed only one skin into your printer at a time.
4. Clean and dry the surface before applying the design.  After allowing the skin to cure for 5 to 10 minutes, simply peel away from the back liner, line it up and apply.  Start from the center and work towards the edges making sure not to trap any air bubbles.
5.  When you want to change or remove the skin, simply peel off slowly, starting from a corner.

Print laptop skin on a standard ink jet printer

Peel die cut laptop skin from the backing sheet

Apply skin to laptop