Image Clip Light Laser Transfer Paper

Image Clip Light Product Benefits:
1. For both fuser oil and oil-less laser copiers and printers.
2. No need to "weed" or trim around image - eliminates unsightly polymer film windows.
3. Hot peel applications from a commercial heat press only.
4. High quality end product with great "hand", softness and feel.
5. Excellent wash and wear durability.
6. Environmentally friendly with no toxic solvents.

Image Clip Light transfer sheets can be used for the following materials:
Recommended for light colored fabrics only. Applies to cotton, cotton/polyester blends and polyester. Choose garments that have a tight weave. This is particularly important when transferring to sweatshirts.

Printing Instructions:
1. Mirror the image.
2. Use the heavy paper printer setting to ensure fusing of the toners.
3. Load the red back printed imaging sheet so that the image will appear on the coated side of the paper.
4. Image Clip Light Paper should be fed into the laser copier or printer with the short dimension first (grain long).

Transferring:
Use a Commercial Heat Press Only ( No Hand Iron).
1. Press the imaged sheet (red printed back) to the transfer sheet (green printed).
This will apply the transfer coating to the imaged area.
Press for 20 seconds at 210°F using light pressure.
Separate the papers while still hot.

2. Press the treated image sheet (red print) face down onto the shirt or other substrate.
Press for 15 seconds at 400°F using heavy pressure.
Peel while still hot. Some toner will remain on the transfer paper after peeling. This is normal.

Storage:
Store Jet-Pro for Active Wear transfer papers in a cool, dry area and do not remove from carton or poly bag until you are ready to use.

Washing Instructions:
Turn garment inside out and wash in cold water using a mild detergent.
Do not use bleach.
Dry on low heat setting.
Do not iron directly on the transferred area.

Test Application:
We thoroughly test each of our products on various substrates using different transfer equipment. However, it is impossible for us to duplicate all variables using all substrates and transfer equipment. Therefore, it is essential that you test the paper prior to production using your equipment, methods, and substrate material. Heat presses vary in accuracy. Conduct tests to determine the best time and temperature to use with your equipment. Please keep in mind that the Seller’s and Manufacturer’s maximum obligation shall be to replace any paper that has proven to be defective. Neither the Seller nor the Manufacturer shall be liable for any injury, direct or consequential, arising out of the use of, or inability to use this paper.