EtchAll Dip 'n Etch - 32 oz.

1. Select a plastic container slightly larger than the object you wish to etch.

2. Weight the object down with marbles, rocks, etc. to prevent it from floating.

3. Place the object to be etched in the empty container. Fill the container with water to the height of the desired etching line. 

4. Remove the object from container and mark the water level on the outside of the container. Pour out the water and dry the plastic container and the object to be etched thoroughly.

5. Pour EtchAll Dip 'n Etch into the container.  Continue filling the container until it reaches the level line indicated from step 3.

 6. Slowly and carefully place the object into the container and leave the object in the EtchAll Dip 'n Etch for 15 minutes.  

7. After the time has elapsed, lift the object from the container and rinse it thoroughly with water.  Clean the object with soap and water and dry it thoroughly.  Return the remaining EtchAll Dip 'n Etch to its original container to be re-used again for another project.  Admire your elegantly etched piece!