DuraCopy Laser/Copier Paper

Size: 8.5" x 11"
Thickness: 4 mils (4/1000") for DuraCopy Matte and 5 mils (5/1000") for DuraCopy Satin.
Finish:  The DuraCopy Matte has a flat finish on both sides.  The DuraCopy Satin has a slightly glossy finish on one side and a matte (flat) finish on the other side.
Features: White opaque film that provides excellent color saturation, print resolution and high quality output.  It can be printed on both sides. Available in a flat matte finish or satin finish.

Possible Uses:

• Temporary weatherproof outdoor signage.
• Charts, checklists, forms and booklets that need to be weatherproof, tearproof and stain resistant.
• Create reusable stencils for airbrushing and painting with a vinyl cutter and carrier sheet.

Printing Instructions:

• Keep film stored in its original packaging until ready to use.  Store under normal office temperature and humidity conditions.
• Handling the film along the edges will avoid fingerprints on image area.
•   Fan the required number of sheets of film (as you would paper) to facilitate feeding.
• Most color copiers/printers require that film be fed through the bypass of the machine according to its instructions.  Film can be imaged on either side.
• It is recommended to wait a few minutes after imaging to allow film to dry before handling.