3G Jet-Opaque Transfer Paper

3G Jet-Opaque Heat Transfer Papers are designed for transferring ink jet images to dark or other colored garments and substrates. The product contains an opaque layer to hide the color of the substrate and allow for photo-quality transfers. This product can be cut with a vinyl cutter, die and kiss-cut. Substrates include: T-shirts, sweatshirts, mouse pads, puzzles, and leather goods. Choose garments that have a tight weave. 3G Jet-Opaque transfer sheets are made by Neenah Paper.

3G Jet-Opaque heat transfer paper can be used on the following materials:
Recommended for Dark colored fabrics.  Applies to cotton, polyester and cotton/polyester blends.  Choose garments that have a tight weave.  This is particularly important when transferring to sweatshirts.

HEAT PRESS INSTRUCTION

PRINTING INSTRUCTIONS:
1. Print image on coated side of paper right reading (do not mirror the image).
2. Trim away the unprinted areas of the transfer.

PRE-TRANSFERRING INSTRUCTIONS:
1. Prepare the substrate by ensuring the surface is clean, dry and wrinkle free.

TRANSFERRING INSTRUCTIONS:
1. Remove the backing paper from the printed image.
2. Place the Heat Transfer Paper on top of the garment with the image facing up (right reading to you).
3. Completely cover the image with an ironing sheet.
4. Place a piece of spare material over the ironing sheet.
5. Press: 30 seconds at 350°F using medium pressure.
6. Once cold peel away ironing sheet in a smooth even motion.

*hand iron is NOT recommended and the product will NOT be as durable when laundered.

WASHING INSTRUCTIONS:
Turn garment inside out and wash in cold water using a mild detergent. Do not use bleach. Dry on low-heat setting. Do not iron directly on the transferred area. IMPORTANT: Heat presses vary in accuracy. The sellers and manufactures maximum obligation shall be to replace any paper that has proven to be defective.

STORAGE:
Store unused transfer sheets in a cool dry place.  Keep them sealed in the zip lock sleeve that they came in to protect them from moisture and dirt.

TEST APPLICATION:
As with all transfers, always perform a test application on the intended garment before going into production.